A technique to design higher supplies for thermoelectric energy era – TechnoNews

Lately, engineers and scientists worldwide have been engaged on new applied sciences for producing electrical energy from renewable power sources, together with photovoltaics (PVs), wind generators and hydro-power mills. Another resolution for mitigating the affect of local weather change might be to transform the surplus or waste warmth generated by industries, households and scorching pure environments into electrical energy.

This method, referred to as thermoelectric energy era, depends on using supplies with useful thermoelectric properties. Particularly, when these supplies are uncovered to significantly excessive temperatures on one facet and colder ones on the opposite, electrons inside them begin to circulation from the new facet to the cooler one, which generates electrical potential

Whereas current works have recognized some promising thermoelectric supplies, the module efficiency is unsatisfactory as a result of challenges related to designing and fabricating optimum module buildings. This considerably limits their potential real-world integration in thermoelectric modules.

Researchers at Pohang College of Science and Expertise, the George Washington College and different institutes not too long ago launched a brand new technique for designing thermoelectric supplies based mostly on copper selenide (Cu₂Se).

This technique, outlined in a paper revealed in Nature Power, allowed them to design promising supplies for high-power era utilizing methods that might be simpler to breed on a big scale.

“Traditional thermoelectric devices consist of p- and n-type semiconductor legs, cuboid in shape, arranged in a thermocouple configuration,” Jae Sung Son, co-author of the paper, instructed Tech Xplore. “In these gadgets, the design of those legs, when it comes to size and side ratio, is essential for optimizing the thermal and electrical resistances to maximise energy era.

“In this context, non-cuboid three-dimensional (3D) geometries could offer additional level of control over thermal and electrical transport, potentially enhancing device performance beyond what cuboid legs can achieve.”

In 2020, the analysis crew led by Prof. Saniya LeBlanc on the George Washington College revealed a paper exploring the leg affect of the semiconductor legs used on the thermoelectric efficiency of thermoelectric energy mills, through a sequence of simulations. However the potential of non-cuboid legs had but to be assessed in experimental settings.

“Our group has been working on 3D printing of thermoelectric materials and devices that would allow us to realize the complex geometry of thermoelectric materials that can’t be achieved by traditional manufacturing processes and investigate their impact on power generation performances,” Son defined.

As a part of their examine, Son and his colleagues used 3D finite component mannequin simulations to design non-cuboid geometries for the semiconductor legs. They then fabricated these geometric designs utilizing 3D printing methods and experimentally assessed their efficiency.

“We chose Cu₂Se as a model material, due to its high material efficiency at high temperatures,” Son mentioned. “We carried out numerical simulations on eight completely different geometries, each cuboid and non-cuboids, to guage energy era below varied working circumstances.

“The 3D printing of Cu₂Se particle-based colloid inks, tailored by the addition of extra Se₈^2- polyanions enabled us to create the designed geometries of Cu₂Se and to comparatively evaluate their power generation performances in a single-leg device.”

The experiments carried out by this crew of researchers yielded attention-grabbing outcomes, highlighting the potential of some non-cubic legs over others. Particularly, the crew noticed that legs with an hourglass-shaped geometry attained the very best energy era, each when it comes to output energy and effectivity.

“This is obviously the first demonstration showing the impact of 3D geometry,” Son mentioned. “We also found that controlled liquid-phase sintering allowed the defect formation of high-density stacking faults and the resulting dislocations. These defects reduced the thermal conductivity of Cu₂Se and consequently enhanced the ZT values up to 2.0.”

The current examine by Son and his colleagues confirms that the 3D geometry of thermoelectric supplies has a big affect on {the electrical} present they will generate. Whereas they particularly used their technique to design Cu₂Se-based supplies, sooner or later it might be utilized to different varieties of thermoelectric supplies, permitting researchers to spice up the efficiency of thermoelectric energy mills with out altering their intrinsic properties.

“In our upcoming studies, we will be applying non-cuboid geometries to different thermoelectric systems, such as segmented devices and Peltier cooling modules,” Son added. “Moreover, integrating structural design tools with thermoelectrics could further enhance device performance and durability.”

© 2024 Science X Community